Aeotec ZW160 Z-Wave Water Sensor 6 Dock

#ad
Aeotec ZW160-Z #ad - Built-in antenna boosts Z-Wave signals to improve signal strength. Powers docked water Sensor 6, saving the sensor's battery life. The dock is powered by plugging into a power outlet using the provided USB cable and a common smartphone charger. Enhance the abilities of the Aeotec Water Sensor 6 with the Aeotec Water Sensor 6 Dock.

. Note: dock for Water Sensor 6 is not waterproof. Specifications: Manufacturer Part #: ZW160 The dock is a supplemental tool used to increase the area monitored by the Water Sensor, helping you detect leaks as soon as they appear so you can prevent or reduce water damage to your possessions. Placing the water sensor 6 on the Dock when the Dock is plugged in powers the Sensor, saving the sensor's batteries from spending energy.

Aeotec ZW160 Z-Wave Water Sensor 6 Dock #ad - Expands coverage for leak detection with additional sensor probes. Monitor two areas for leaks with two probes. Install the dock in a place that will not be exposed to water if a leak or flood appears. The dock comes with two probes that can monitor two separate surfaces, including floors, up to 1 meter away from the installation location of Dock.

Warranty: 1 Year. The water sensor 6's battery will be used as a backup battery in case power is interrupted to the dock.

#ad



Aeotec Water Sensor 6 for Home Security Z-Wave Plus Water Leak Detector Smart Flood Sensor Freeze Sensor Temperature Detector Lasso Sensor

#ad
AEOTEC ZW160 #ad -
#ad



Aeotec Door/Window Sensor 7, Z-Wave Plus S2 Smart Start, 3-in-1 with Dry Contact & Tilt sensors, 3 Year Battery Life, White

#ad
Aeotec #ad - Compatible with samsung smartthings, zipabox, homeseer, 916.00 mhz, ring, nexia, vera, Open Z-Wave, Frequency: 908.40 mhz, domoticz and more. Id: zc10-19066568. With z-wave plus certification and S2 encryption, the sensor is one of the fastest performing and most secure sensors in the market. For indoor use only.

Multisensors include magnetic contact, dry contact relay, and a tilt sensor. Best battery life, optimized to use up to 66% less battery power to communicate than previous generations. The door/window sensor consists of two parts: the main sensor which mounts onto the door/window itself, and the magnet which mounts onto the door/window frame.

Aeotec Door/Window Sensor 7, Z-Wave Plus S2 Smart Start, 3-in-1 with Dry Contact & Tilt sensors, 3 Year Battery Life, White #ad - Monitor the open/closed status of a door, cabinet, window, safe, or any other open/close object with the Aeotec Z-Wave Door/Window Sensor 7. Slimline rare-earth magnet technology offers instant alerts when moved. Note: requires a Z-Wave network controller, sold separately. When the two components are separated, the sensor sends signals to up to 7 Z-Wave devices to alert of the change in status or to trigger security or automation events.

Manufacturer Part #: ZWA008. The sensor mounts with the included screws or double-sided tape. This miniscule door/window sensor discreetly monitors your chosen entryways or important storage with its simple design and reduced size.

#ad



Aeotec Multisensor 6, Z-Wave Plus 6-in1 motion, temperature, humidity, light, UV, vibration sensor

#ad
Aeon Labs LLC ZW100 #ad - Super-small at 1. 8 inches. Its perfectly small exterior hosts the technology for real-time intelligence. Slimline rare-earth magnet technology offers instant alerts when moved. You need a z-wave gateway which operates with the 500 series chip products to take full advantage of the device. Security sensor with its own security.

Door window sensor 7 can remind you to close the doors and windows you left open, if you use it work with Aeotec's Nano Shutter, it can even close them for you. Multisensor 6 is the foundation of a modern smart home. Best battery life, optimized to use up to 66% less battery power to communicate than previous generations.

Aeotec Multisensor 6, Z-Wave Plus 6-in1 motion, temperature, humidity, light, UV, vibration sensor #ad - Specifications: motion sensor : 16 feet, and 120° field of view; humidity sensor : 20% to 95%, accuracy:+/- 5% at 77°F; Temperature Sensor : 14°F -10°C ~ 140°F 60°C, accuracy: +/- 32.9°f 05°c; light sensor : 0 lux to 1000 lux; vibration sensor : acts as tamper switch, on or off; operation temperature top: -4°f -20°c ~ 140°f 40°c; storing temperature: -40°F -40°C ~ 176°F 80°C; Working Humidity: 8% ~ 80%; Operational site: Indoor and outdoor; Power: DC 5V 500mA or 2 x CR123A battery; Weight: 2.

6 oz smallest 3-in-1 z-wave door / window sensor. Designed and calibrated to be as accurate as it can be, MultiSensor 6’s accuracy varies as little as ±02%. Compatible with samsung smartthings, zipabox, homeseer, 916.

#ad



Aeotec Z-Stick Gen5, Z-Wave Plus USB to create gateway

#ad
Aeon Labs LLC ZW090 #ad - Compatible with samsung smartthings, zipabox, homeseer, 916.00 mhz, nexia, vera, ring, Open Z-Wave, Frequency: 908.40 mhz, domoticz and more. Id: zc10-19066568. 6-in-1 z-wave plus multisensor: motion, light lux, UV, humidity, temperature, vibration sensor.2 year battery life. Certification number: ZC10-15060006.

Multisensors include magnetic contact, dry contact relay, and a tilt sensor. No software included. Z-wave plus certified. Certification number: ZC10-15070011. Best battery life, optimized to use up to 66% less battery power to communicate than previous generations. For enhanced network performance and reduced downtime, Z-Stick Gen5 contains an inbuilt, rechargeable info-lithium battery.

Aeotec Z-Stick Gen5, Z-Wave Plus USB to create gateway #ad - Security sensor with its own security. Slimline rare-earth magnet technology offers instant alerts when moved. Capable of controlling up to 232 different z-wave devices, z-stick gen5 works with with open source software such as Domoticz, and OpenHab2 and also works with commercially available software such as Axial Control, OpenHab, including those that use the more advanced Z-Wave Plus, Homeseer, and able to run on both full powered PCs and low powered PCs such as Raspberry Pi, Home Assistant, Indigo for MacOS.

Perfect z-wave scene triggering sensor. 3 year+ battery life powered by 1 x 1/2 AA battery. Package: 1x z-stick gen5, 1x Manual, the others are not included.

#ad



Zooz Z-Wave Plus Power Switch ZEN15 for 110V AC Units, Sump Pumps, Humidifiers, and More

#ad
ZOOZ ZEN15 #ad - Certification number: ZC10-15070011. Quick status reports to the controller and on/off state recovery after power failure. Powerful hardware: made from high-quality components that will last, even when it's very cold or very hot 14° - 104°F, indoor use only. Etl certified: complies with North American electrical safety standards.

Extra-thick flexible cord is perfect for installations with no immediate access to a receptacle. Compatibility: use the power switch with any certified z-wave gateway for simple on/off control Wink, HomeSeer, SmartThings custom device handler required, Z-Wave alarm panels. Compatible with samsung smartthings, zipabox, homeseer, 916.

Zooz Z-Wave Plus Power Switch ZEN15 for 110V AC Units, Sump Pumps, Humidifiers, and More #ad - 00 mhz, ring, nexia, vera, Open Z-Wave, Frequency: 908.40 mhz, domoticz and more. Id: zc10-19066568. 6-in-1 z-wave plus multisensor: motion, light lux, temperature, humidity, UV, vibration sensor.2 year battery life. Super-small at 1. 8 inches. Door window sensor 7 can remind you to close the doors and windows you left open, if you use it work with Aeotec's Nano Shutter, it can even close them for you.

#ad



Aeotec Range Extender 6, Z-Wave Plus repeater

#ad
Aeon Labs LLC ZW117 #ad - As it's custom desgined as a wireless signal booster, Range Extender 6 performs better than other Z-Wave devices that offer simply repeating; it amplifies the signal too. Compatible with all z-wave gateways including Control4, SmartThings, Fibaro, and Vera. Z-wave plus certified. Aeotec's range extender 6 works seamlessly to amplify and repeat weak Z-Wave and Z-Wave Plus signals.

Door window sensor 7 can remind you to close the doors and windows you left open, if you use it work with Aeotec's Nano Shutter, it can even close them for you. You use range extender 6 to keep Z-Wave reliable. It repeats signals 250% faster than other signal repeaters and can repeat Z-Wave signals up to 492 feet away when unobstructed.

Aeotec Range Extender 6, Z-Wave Plus repeater #ad - Extra-thick flexible cord is perfect for installations with no immediate access to a receptacle. Compatibility: use the power switch with any certified z-wave gateway for simple on/off control Wink, SmartThings custom device handler required, HomeSeer, Z-Wave alarm panels. Compatible with samsung smartthings, zipabox, homeseer, 916.

00 mhz, vera, open z-wave, ring, nexia, Frequency: 908.40 mhz, domoticz and more. Id: zc10-19066568.

#ad



Aeotec Multisensor 6 & Ceiling Recessor, Z-Wave Plus 6-in-1 Motion, Temperature, Humidity, Light, UV, Vibration Sensor, Battery Included

#ad
Aeotec 101016300001 #ad - Door window sensor 7 can remind you to close the doors and windows you left open, if you use it work with Aeotec's Nano Shutter, it can even close them for you. Quick status reports to the controller and on/off state recovery after power failure. Powerful hardware: made from high-quality components that will last, even when it's very cold or very hot 14° - 104°F, indoor use only.

1 x cr123a included in the box. Super-small at 1. 65 inches. Compatible with Z-Wave and Z-Wave Plus. Amplifies and repeats weak signals boosting the range and reliability of weak Z-Wave devices. Plug in to 110 volt wall socket. And it can be powered 2 different ways: by batteries or via a USB cable and adapter. A part of aeotec gen5 range of Z-Wave products, MultiSensor 6 outperforms all that has come before it.

Aeotec Multisensor 6 & Ceiling Recessor, Z-Wave Plus 6-in-1 Motion, Temperature, Humidity, Light, UV, Vibration Sensor, Battery Included #ad - Certification number: ZC10-15070011. Etl certified: complies with North American electrical safety standards. Package: 1x z-stick gen5, 1x Manual, the others are not included. Can be used to upgrade the firmware of compatible Z-Wave Plus devices that can accept OTA / wirelss firmware upgrades. Compatible with z-wave enabled, openHab, Home Seer, indigo 7, home automation software including Home Assistant, and OpenHab2.

#ad



GE 46201 Enbrighten Z-Wave Plus Smart Light Switch with QuickFit and SimpleWire, Works with Alexa, Google Assistant, Zwave Hub Required, Repeater/Range Extender, 3-Way 2nd Gen, White & Light Almond

#ad
Jasco Products Company 46201 #ad - Small design so it does not block other outlets. Package: 1x z-stick gen5, 1x Manual, the others are not included. Can be used to upgrade the firmware of compatible Z-Wave Plus devices that can accept OTA / wirelss firmware upgrades. Compatible with z-wave enabled, home automation software including Home Assistant, Home Seer, OpenHab, indigo 7, and OpenHab2.

The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches - models 12723, 12728, or 46200 Advanced settings and energy monitoring available for open systems only, including Vera, contact seller first, and Fibaro Home Center Lite. Z-wave plus wireless signal repeater and range extender.

GE 46201 Enbrighten Z-Wave Plus Smart Light Switch with QuickFit and SimpleWire, Works with Alexa, Google Assistant, Zwave Hub Required, Repeater/Range Extender, 3-Way 2nd Gen, White & Light Almond #ad - Works with the following z-wave certified hubs: smartthings, adt command, Vivint, Honeywell, Home Seer, ADT Pulse, Nexia, Wink, Harmony Home Hub Extender, Ring Alarm, Trane, Vera and more. Full-home coverage - z-wave plus works with all previous z-wave generations to allow continued expansion of your home-automation network.

Home automation is simple through custom scenes, 46199, personalized scheduling and convenient alerts. The switch is capable of controlling indoor or outdoor fixtures for whole-home automation = and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150ft. Certification number: ZC10-15060006.

Certification number: ZC10-15070011.

#ad



Aeotec Smart Switch 6, Z-Wave Plus Wireless Control Plug for Home Security Automation, 15A Mini Size, Monitor Power, New Design without USB port

#ad
Aeotec #ad - Quick fit enhancements are the ideal smart solution for older-style switch boxes, which are offset to avoid switch box mounting screws, multi-gang configurations or any other application with limited space. The device's energy usage is reflected by the switch's multicolor LED ring, which can display up to 16 million colors.

Smart switch 6 controls up to 15 amps and monitors real-time power consumption with a variable color LED ring and reports the data to the gateway system. Tested to work with z-wave gateways including samsung smartthings, eedomus, webee, oomi, Indigo 7, Open Z-Wave, openHAB, Vera, Home Assistant, InControl, Jeedom, Zipabox, Universal Devices ISY994Zw, wink-hub, HomeSeer, Abode and more.

Aeotec Smart Switch 6, Z-Wave Plus Wireless Control Plug for Home Security Automation, 15A Mini Size, Monitor Power, New Design without USB port #ad - Sleek & minimal. Can be installed in corner, in-wall, on shelf or in downlight. Works with certified z-wave gateways and tested with Fibaro, Indigo 7, SmartThings, openHAB, Vera. Z-wave plus certified. New: 45 degree angled plug so you can fit 2 Smart Switches in a single receptacle! Powerful z-wave: with built-in z-wave plus signal repeater and range test tool, the Power Switch will boost your whole Z-Wave network while keeping it protected with AES signal encryption.

Powerful control: monitor energy use of connected appliances in live mode or over time with W, kWh, A, and V reports your Z-Wave hub needs to support this feature. The multicolor led ring surrounding the outlet indicates On/Off status and energy usage can be optionally disabled.

#ad



Z-Wave Plus Rare Earth Magnets Door & Window Sensor, White & Brown DWZWAVE2.5-ECO

#ad
Ecolink 28617953415 DWZWAVE2.5-ECO #ad - Vera plus, vera Edge, Vera Lite. Compatible with Z-Wave and Z-Wave Plus. Amplifies and repeats weak signals boosting the range and reliability of weak Z-Wave devices. Plug in to 110 volt wall socket. Powerful plug: the only z-wave plug that lets you safely control and monitor heavy-duty 110v appliances from your Z-Wave smart home system.

It's aeotec newer design with all the powerful features packed in the tiny size of 2. 20 x 2. 20 x 1. 96 1. 38 inches. Z-wave plus certified for quicker response time, better wireless range, and additional wireless security encryption. Smart switch 6 controls up to 15 amps and monitors real-time power consumption with a variable color LED ring and reports the data to the gateway system.

Z-Wave Plus Rare Earth Magnets Door & Window Sensor, White & Brown DWZWAVE2.5-ECO #ad - Tested to work with z-wave gateways including samsung smartthings, incontrol, openHAB, wink-hub, HomeSeer, Jeedom, Home Assistant, Zipabox, Webee, eedomus, Indigo 7, Open Z-Wave, Vera, oomi, Universal Devices ISY994Zw, Abode and more. Sleek & minimal. Quick fit enhancements are the ideal smart solution for older-style switch boxes, which are offset to avoid switch box mounting screws, multi-gang configurations or any other application with limited space.

Certification number: ZC10-15060006. Advanced settings and energy monitoring available for open systems only, contact seller first, including Vera, and Fibaro Home Center Lite.

#ad