Lisle 61900 Heavy Duty Bearing and Seal Driver Set

#ad
Lisle 61900 #ad - Driver sizes:  3-43/64", 4-13/16", 4-7/8", 5-1/2", 5-25/32" and 6". Includes six drivers and handle extension for driving bearing races and seals on hubs with deep brake drums without removing the drums. Use the tapered driver side for bearing races and the flat side for seals. Fits most class 8 over the Road Trucks and Trailers and Some Medium Duty Trucks.

#ad



Lisle 19852 Truck and Trailer Wheel Pan

#ad
Lisle 19852 #ad - Prevents oil mess during wheel repair. Truck & trailer Wheel Pan. Catches oil from Wheel Hubs After Removing Cap. Made of polypropylene for durability; will not warp if oil is warm. Capacity 88 ounces. The pan fits rims with 13 3/4" ID and larger; handle compartments hold hub nuts out of the oil.

#ad



Lisle 61850 Truck Hub Seal Installer Kit, 5pc

#ad
Lisle 61850 #ad - Fits the most popular sizes for class 7 and class 8 over the road trucks and trailers and some medium duty trucks. Catches oil from Wheel Hubs After Removing Cap. Capacity 88 ounces. Stored in a plastic case. Made of polypropylene for durability; will not warp if oil is warm. Includes five drivers and handle extension for extra reach for driving seals on hubs with deep Brake Drums without removing the Drums.

Lisle 61850 Truck Hub Seal Installer Kit, 5pc #ad - The pan fits rims with 13 3/4" ID and larger; handle compartments hold hub nuts out of the oil. The driver is designed to hold the seals to make installation easier. Prevents oil mess during wheel repair.

#ad



Lisle 12800 Master Pneumatic Bearing Set

#ad
Lisle 12800 #ad - Capacity 88 ounces. The driver is designed to hold the seals to make installation easier. Stored in a plastic case. Catches oil from Wheel Hubs After Removing Cap. Includes five drivers and handle extension for extra reach for driving seals on hubs with deep Brake Drums without removing the Drums. Prevents oil mess during wheel repair.

Lisle 12800 Master Pneumatic Bearing Set #ad - The pan fits rims with 13 3/4" ID and larger; handle compartments hold hub nuts out of the oil. Made of polypropylene for durability; will not warp if oil is warm. This master set contains 11 Drivers to Fit Automobiles and Trucks up to 1 Ton. To add the pneumatic handle to your current set order a 12820 pneumatic driver.

. This set also includes 2 handles, one for hammering and a pneumatic handle for use with an air hammer. Automobiles and Trucks up to 1 Ton. Sizes: 1. 565, 2. 830, 2. 325, 3. 813, 1. 965, 4.

#ad



OTC 1914 4" 6-Point Hexagon Locknut Wrench

#ad
OTC 1914 #ad - A long extension may be attached to the socket to provide the necessary clearance. Made of polypropylene for durability; will not warp if oil is warm. Stored in a plastic case. High strength steel resists rounding out. Measure from flat to flat to determine size of locknut. To add the pneumatic handle to your current set order a 12820 pneumatic driver.

Capacity 88 ounces. The driver is designed to hold the seals to make installation easier. For use with 3/4 inch square-drive manual tools only. Bearing locknut socket - 4 in - 6 Pt Truck wheel bearing locknut socket has 3/4" square drive opening. Permits the use of an extension & torque wrench to tighten the locknut as required.

OTC 1914 4" 6-Point Hexagon Locknut Wrench #ad - Socket is made of high-strength steel. The pan fits rims with 13 3/4" ID and larger; handle compartments hold hub nuts out of the oil. Depth of locknut sockets is 5 inch. Use the tapered driver side for bearing races; reverse to the flat side for seals. Opening resists "rounding out. Catches oil from Wheel Hubs After Removing Cap.

#ad



OTC 5085 28" Hub Oil Seal Remover

#ad
OTC 5085 #ad - Otc's hub oil seal remover eliminates bearing and hub damage that can occur when a punch and hammer are used to remove the seal. Value is at the core of the OTC tool and equipment portfolio. Removes hub seals on trailer and truck axles including truck steering axles. Whether it’s a specialty tool or unique piece of service equipment, OTC provides top solutions to modern automotive service challenges while increasing technicians’ productivity and shop profits.

High strength steel resists rounding out. Extra long, 28 inch handle provides superior leverage. The pan fits rims with 13 3/4" ID and larger; handle compartments hold hub nuts out of the oil. Built from the highest quality heat-treated steel. Plated finish with a rubber handle. Includes five drivers and handle extension for extra reach for driving seals on hubs with deep Brake Drums without removing the Drums.

OTC 5085 28" Hub Oil Seal Remover #ad - Extra long, 28 inch handle provides leverage, unique pulling head design quickly and easily removes the seal in one piece. Stored in a plastic case. Use the tapered driver side for bearing races; reverse to the flat side for seals. This set also includes 2 handles, one for hammering and a pneumatic handle for use with an air hammer.

Capacity 88 ounces.

#ad



Lang Tools 4651 Automatic Slack Adjuster Release Tool and Wrench

#ad
Lang Tools 4651 #ad - Catches oil from Wheel Hubs After Removing Cap. Sizes: 1. 565, 2. 830, 2. 325, 3. 813, 1. 965, 4. 625, 2. 995, 1. 750, 2. 555, 2. 470, 3. 1804 inch 6-point hexagon locknut wrench. Unique pulling head design quickly and easily removes the seal in one piece. Made in the usa, which is for releasing the tensioner button, lang tools 4651 automatic Slack Adjuster Release Tool and Wrench is for use with automatic slack adjusters on Meritor systems.

This set also includes 2 handles, one for hammering and a pneumatic handle for use with an air hammer. Capacity 88 ounces. Made in the usa, lang tools 4651 automatic Slack Adjuster Release Tool and Wrench is for use with automatic slack adjusters on Meritor systems. Made of polypropylene for durability; will not warp if oil is warm.

Lang Tools 4651 Automatic Slack Adjuster Release Tool and Wrench #ad - Release the anti-reverse mechanism without prying and apply more turning power with less fatigue to the hand. Made in the USA. Prevents oil mess during wheel repair. To add the pneumatic handle to your current set order a 12820 pneumatic driver. Depth of locknut sockets is 5 inch. Built from the highest quality heat-treated steel.

#ad



Lisle 59400 Pinion Bearing Race Driver Set

#ad
Lisle 59400 #ad - High strength steel resists rounding out. Use the extended, two-piece handle for driving rear pinion bearing races. For use with 3/4 inch square-drive manual tools only. Depth of locknut sockets is 5 inch. Extra long, 28 inch handle provides superior leverage. Set includes 8 drivers for driving inner and Outer Pinion Bearing Races on 1/2 and 3/4 Ton Ford, Dodge and GM Pickups.

Built from the highest quality heat-treated steel. This set also includes 2 handles, one for hammering and a pneumatic handle for use with an air hammer. The pan fits rims with 13 3/4" ID and larger; handle compartments hold hub nuts out of the oil. The driver is designed to hold the seals to make installation easier.

Lisle 59400 Pinion Bearing Race Driver Set #ad - Use the tapered driver side for bearing races; reverse to the flat side for seals. Made of polypropylene for durability; will not warp if oil is warm. Removes hub seals on trailer and truck axles including truck steering axles. The 4651 includes a fork-end tool, and the 5/16" double square offset reversible wrench features an E-Z Grip handle.

For adjusting automatic slack adjusters on Meritor systems. Capacity 88 ounces.

#ad



Sunex 533MD, 1 Inch Drive, 33mm Deep Impact Socket, Cr-Mo Steel, Radius Corner Design, Chamfered Opening, Dual Size Markings

#ad
Sunex International 533MD #ad - The pan fits rims with 13 3/4" ID and larger; handle compartments hold hub nuts out of the oil. The 4651 includes a fork-end tool, and the 5/16" double square offset reversible wrench features an E-Z Grip handle. For adjusting automatic slack adjusters on Meritor systems. Otc's hub oil seal remover eliminates bearing and hub damage that can occur when a punch and hammer are used to remove the seal.

Sunex 533MD, 1 Inch Drive, 33mm Deep Impact Socket, Cr-Mo Steel, Radius Corner Design, Chamfered Opening, Dual Size Markings #ad - Release the anti-reverse mechanism without prying and apply more turning power with less fatigue to the hand. High strength steel resists rounding out. For use with 3/4 inch square-drive manual tools only. This set also includes 2 handles, one for hammering and a pneumatic handle for use with an air hammer.

Includes five drivers and handle extension for extra reach for driving seals on hubs with deep Brake Drums without removing the Drums. Sizes: 1. 565, 2. 830, 2. 325, 3. 813, 1. 965, 4. 625, 2.

#ad



Ken-Tool 35429 Automotive Accessories

#ad
Ken-Tool 35429 #ad - This set also includes 2 handles, one for hammering and a pneumatic handle for use with an air hammer. Country of manufacture: United States. Includes five drivers and handle extension for extra reach for driving seals on hubs with deep Brake Drums without removing the Drums. High strength steel resists rounding out.

For use with 3/4 inch square-drive manual tools only. Bead breaking Wedge, Length 32 In. Sizes: 1. 565, 2. 830, 2. 325, 3. 813, 1. 965, 4. 625, 2. 995, 1. 750, 2. 555, 2. 470, 3. 1804 inch 6-point hexagon locknut wrench. Capacity 88 ounces. Extra long, 28 inch handle provides superior leverage. Lifetime warranty with sunexpress: Get in the express lane with the industry's leading warranty program and exchange warranted products directly with Sunex.

Ken-Tool 35429 Automotive Accessories #ad - Deep: access to parts that need to reach further into the socket, such as bolted joints and clamp bolts.

#ad



Ken-Tool 34645 Automotive Accessories

#ad
Ken-Tool 34645 #ad - For use with 3/4 inch square-drive manual tools only. Stored in a plastic case. Built from the highest quality heat-treated steel. Manufacturer: KEN-TOOL. Unique pulling head design quickly and easily removes the seal in one piece. High strength steel resists rounding out. Otc's hub oil seal remover eliminates bearing and hub damage that can occur when a punch and hammer are used to remove the seal.

Manufacturer: KEN-TOOL. Sizes: 2-11/16", 2-27/32", 3-1/4", 3-3/4", 3-1/2", 2-7/8", 3", 4-1/8". A pneumatic handle is also included for use with an air hammer. Extra long, 28 inch handle provides superior leverage. Removes hub seals on trailer and truck axles including truck steering axles. Lifetime warranty with sunexpress: Get in the express lane with the industry's leading warranty program and exchange warranted products directly with Sunex.

Ken-Tool 34645 Automotive Accessories #ad - Deep: access to parts that need to reach further into the socket, such as bolted joints and clamp bolts. Cr-mo steel: provides the strength and flexibility to handle high torque impact tools. Radius corner design: reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.

Chamfered opening: Quickly aligns fastener to socket. Dual size markings: Laser etched and roll stamped markings to ensure permanent socket identification.

#ad