MG Chemicals 422B-340G Silicone Conformal Coating, Clear, 340 gram Aerosol

#ad
MG Chemicals 422B-340G #ad - For spraying, liquid can be thinned using M. G. Easy rework and repairs: solder through the coating or remove with MG Cat. Thin up to one half part thinner to one part coating. It is essential that surfaces be free of any trace of grease or organic substances. Certified ul 94 v-0 file# E203094. Heat curing will improve the physical strength of this coating.

No. Best results will be obtained by applying to thoroughly cleaned and dried parts or materials. Thinner Cleaner. Maximum constant service temperature of 200 °C 392 °F. Excellent corrosion resistance-tested in salt spray environment with no oxidation or coating damage. Rohs compliant. We recommend curing in a convection oven at 65 degree C for one hour, but other temperature and time combinations can work well.

MG Chemicals 422B-340G Silicone Conformal Coating, Clear, 340 gram Aerosol #ad - It protects and insulates electrical and electronic components and assemblies, transformers, relays, motors, including generators, and solenoid coils.8309 liquid or 8310A Gel stripper formulations. Silicone conformal coating 422b is a flexible finish product that provides a protective coating for printed circuit boards against moisture, corrosion, and thermal shock.

Ideal for high temperature environments. Curing may be accelerated by applying moderate heat with either a convection oven or infrared lamps.

#ad



MG Chemicals 422B Silicone Modified Conformal Coating, 55 ml Bottle

#ad
MG Chemicals 422B-55ML #ad - Excellent corrosion resistance-tested in salt spray environment with no oxidation or coating damage. Maximum constant service temperature of 200 °C 392 °F. Fluoresces under UV-A light blacklight. No. Validated for selective robotic coating equipment including PVA and Nordson ASYMTEK. Heat curing will improve the physical strength of this coating.

MG Chemicals 422B Silicone Modified Conformal Coating, 55 ml Bottle #ad - Curing may be accelerated by applying moderate heat with either a convection oven or infrared lamps. Best results will be obtained by applying to thoroughly cleaned and dried parts or materials. Thin up to one half part thinner to one part coating. 8309 liquid or 8310A Gel stripper formulations. At room temperature, the product will tack free in approximately 5-7 minutes, and full cure will be achieved in approximately 48 hours.

Easy rework and repairs: solder through the coating or remove with MG Cat. It is essential that surfaces be free of any trace of grease or organic substances. For spraying, liquid can be thinned using M. G. Ideal for high temperature environments.

#ad



MG Chemicals Premium Acrylic Conformal Coating, Clear Finish, 12 oz, Aerosol Can

#ad
MG Chemicals 419D-340G #ad - Mg chemicals 419d premium acrylic conformal coating is an IPC-CC-830B and UL 94-V0 certified, fast drying, xylene and toluene free product that provides an excellent finish. The 419d coating can serve to protect high technology devices like cell phones, computer tablets, avionics, and more. Excellent finish - smooth, homogeneous, and durable crystal clear coat and Easy to inspect - fluoresces under black light UV light.

Excellent corrosion resistance-tested in salt spray environment with no oxidation or coating damage. Fluoresces under UV-A light blacklight. Validated for selective robotic coating equipment including PVA and Nordson ASYMTEK. This one part coating is easy to use and repair: it does not require special or costly equipment or materials.

MG Chemicals Premium Acrylic Conformal Coating, Clear Finish, 12 oz, Aerosol Can #ad - It insulates against high-voltage arcing, shorts, and static discharges. Certified ul 94v-0 file# E203094. 8309 liquid or 8310A Gel stripper formulations. Easy rework and repairs: solder through the coating or remove with MG Cat. Protects electronics from moisture, fungus, corrosion, and static discharges. Easy rework and repairs - can solder through coat or remove with MG Chemicals' thinner/cleaner, thinner 4, or conformal coating stripper.

#ad



CRC Urethane Seal Coat Viscous Liquid Coating, 250 Degree F Maximum Temperature, 11 oz Aerosol Can, Clear - 18411

#ad
CRC Industries 18411 #ad - No. Maximum constant service temperature of 200 °C 392 °F. Helps comply with osha hazard Communications Standard 29 CFR 19101200 Easy rework and repairs: solder through the coating or remove with MG Cat. Excellent finish - smooth, homogeneous, and durable crystal clear coat and Easy to inspect - fluoresces under black light UV light.

Material safety data label - provides instant access to current safety information should an accident or OSHA inspection occur. High dielectric strength 1300 volts/mil, high surface and volume resistivity make it ideal for electrical/electronics applications. Crc urethane seal coat - red provides a conformal polyurethane coating that insulates electrical equipment and seals out water and moisture.

CRC Urethane Seal Coat Viscous Liquid Coating, 250 Degree F Maximum Temperature, 11 oz Aerosol Can, Clear - 18411 #ad - Allows easy visualization of circuit paths on PC boards. Excellent corrosion resistance-tested in salt spray environment with no oxidation or coating damage. Not hazardous air pollutants - free of toluene and xylene. Dries quickly to a hard, durable, flexible and non-conductive film. Ideal for electrical/electronics applications.

8309 liquid or 8310A Gel stripper formulations. It dries quickly to a hard, durable and flexible film.

#ad



MG Chemicals Premium Polyurethane Conformal Coating, 11 oz, Aerosol

#ad
MG Chemicals 4223F-312G #ad - Good resistance to solvents, salt fog and sulfur. Certified ul 94 v-0 file# E203094. It is ideal for chemically challenging environments. The 4223f urethane protects electric circuits against aggressive chemicals, dirt, thermal shocks, moisture, dust, and scratches. Certified ul 94v-0 file# E203094. Service temperature range -40°c to +125°c.

Maximum constant service temperature of 200 °C 392 °F. Excellent finish - smooth, homogeneous, and durable crystal clear coat and Easy to inspect - fluoresces under black light UV light. Allows easy visualization of circuit paths on PC boards. Put in oven at 80 °c 176 °f for 16 hrs -or- put in oven at 100 °C 212 °F for 2 hrs.

MG Chemicals Premium Polyurethane Conformal Coating, 11 oz, Aerosol #ad - Not hazardous air pollutants - free of toluene and xylene. High dielectric strength 1300 volts/mil, high surface and volume resistivity make it ideal for electrical/electronics applications. Excellent corrosion resistance-tested in salt spray environment with no oxidation or coating damage. Rated ul 746e file # E203094 for outdoor use.

Dries quickly to a hard, durable, flexible and non-conductive film. This one part coating is easy to use and repair: it does not require special or costly equipment or materials. No.

#ad



MG Chemicals 4223-55ML Urethane Conformal Coating, 55 ml Bottle

#ad
MG Chemicals 4223-55ML #ad - High dielectric strength 1300 volts/mil, high surface and volume resistivity make it ideal for electrical/electronics applications. It protects and insulates electrical and electronic components and assemblies, transformers, relays, including generators, motors, and solenoid coils. For spraying, liquid can be thinned using M.

MG Chemicals 4223-55ML Urethane Conformal Coating, 55 ml Bottle #ad - G. 44 - 55 sec. Externally qualified to ipc-CC-830B-class A, by Pacific Testing Laboratories. Chemicals Cat No. Rated ul 746e file # E203094 for outdoor use. At 20 degree c air drying time on strip, ASTM D-115-Set to touch. Not hazardous air pollutants - free of toluene and xylene. Clear amber color. Urethane conformal coating is a durable finish product that provides a protective coating for printed circuit boards against moisture, corrosion, and thermal shock.

For spraying, liquid can be thinned using M. G. 10 min. 1 hour federal specification, TT-P-1436-free of after tack. Viscosity, #1 demmler Cup at 30 degree C 86 degree F.

#ad



Thermaltronics FBA_TMT-TC-2 Lead Free Tip Tinner, 20 g in 0.8 oz. Container

#ad
Thermaltronics FBA_TMT-TC-2 #ad - Fluoresces under UV-A light blacklight. Minimal residues. Rated ul 746e file # E203094 for outdoor use. It protects and insulates electrical and electronic components and assemblies, relays, including generators, motors, transformers, and solenoid coils. For spraying, liquid can be thinned using M. G. Urethane conformal coating is a durable finish product that provides a protective coating for printed circuit boards against moisture, corrosion, and thermal shock.

Externally qualified to ipc-CC-830B-class A, by Pacific Testing Laboratories. Thinner cleaner; Comes with Easy Brush Cap applicator. Dries quickly to a hard, durable, flexible and non-conductive film. Certified ul 94v-0 file# E203094. Validated for selective robotic coating equipment including PVA and Nordson ASYMTEK.

Thermaltronics FBA_TMT-TC-2 Lead Free Tip Tinner, 20 g in 0.8 oz. Container #ad - Removes tip oxidation. Certified ul 94 v-0 file# E203094. Protects electronics from moisture, fungus, corrosion, and static discharges. Easy rework and repairs - can solder through coat or remove with MG Chemicals' thinner/cleaner, thinner 4, or conformal coating stripper. Thermaltronics tmt-tc-2 tip tinners is a compressed tablet of pure tin and ammonia phosphate formulation in a metal container with lid.

#ad



1.0 Gram - Thermal Grizzly Conductonaut Thermal Grease Paste

#ad
Thermal Grizzly TG-C-001-R #ad - Easy rework and repairs: solder through the coating or remove with MG Cat. Thermal conductivity 73 W/mk. Delivered in easy-to-apply syringe with 1. 0g paste. Removes tip oxidation. Put in oven at 80 °c 176 °f for 16 hrs -or- put in oven at 100 °C 212 °F for 2 hrs. Thermal conductivity of this product is 73 W/mk and thermal resistance of 0

0021 k/w. Good resistance to solvents, salt fog and sulfur. Rated ul 746e file # E203094 for outdoor use. Excellent finish - smooth, homogeneous, and durable crystal clear coat and Easy to inspect - fluoresces under black light UV light. Protects electronics from moisture, corrosion, fungus, and static discharges.

1.0 Gram - Thermal Grizzly Conductonaut Thermal Grease Paste #ad - Easy rework and repairs - can solder through coat or remove with MG Chemicals' thinner/cleaner, thinner 4, or conformal coating stripper. Fluoresces under UV-A light blacklight. No-clean compatible formulation. High efficiency paste with excellent thermal conductivity, recommended for experienced users and systems where thermal conductivity is critical.

Urethane conformal coating is a durable finish product that provides a protective coating for printed circuit boards against moisture, corrosion, and thermal shock. Ideal for extreme chemical conditions.

#ad



ACL Staticide 8690 Acrylic Conformal Coating, Aerosol, 12 oz.

#ad
ACL Staticide 8690-each #ad - Dries quickly to a hard, durable, flexible and non-conductive film. Certified ul 94v-0 file# E203094. Good resistance to solvents, salt fog and sulfur. Validated for selective robotic coating equipment including PVA and Nordson ASYMTEK. No-clean compatible formulation. Excellent dielectric strength. Minimal residues.

Protects electronics from moisture, corrosion, fungus, and static discharges. Easy rework and repairs - can solder through coat or remove with MG Chemicals' thinner/cleaner, thinner 4, or conformal coating stripper. Not hazardous air pollutants - free of toluene and xylene. Maximum constant service temperature of 200 °C 392 °F.

ACL Staticide 8690 Acrylic Conformal Coating, Aerosol, 12 oz. #ad - Acrylic conformal coat meets MIL-I-46058C Type AR. Removes tip oxidation. Externally qualified to ipc-CC-830B-class A, by Pacific Testing Laboratories. Allows easy visualization of circuit paths on PC boards. Will not fade, yellow, crack, or discolor over time under normal use conditions. Contains a UV indicator for quality control inspections.

Popular choice for very experience PC builders.

#ad



MG Chemicals Peelable Solder Mask 250 ml Tube

#ad
MG Chemicals 862-250ML #ad - Not hazardous air pollutants - free of toluene and xylene. High dielectric strength 1300 volts/mil, high surface and volume resistivity make it ideal for electrical/electronics applications. Thermal conductivity 73 W/mk. Urethane conformal coating is a durable finish product that provides a protective coating for printed circuit boards against moisture, corrosion, and thermal shock.

MG Chemicals Peelable Solder Mask 250 ml Tube #ad - Allows easy visualization of circuit paths on PC boards. Thixotropic, synthetic latex designed to withstand fluxing, wave soldering and cleaning. Lead free RoHS Compliant. Maximum constant service temperature of 200 °C 392 °F. Rated ul 746e file # E203094 for outdoor use. Removes tip oxidation. Put in oven at 80 °c 176 °f for 16 hrs -or- put in oven at 100 °C 212 °F for 2 hrs.

8309 liquid or 8310A Gel stripper formulations. Easy rework and repairs: solder through the coating or remove with MG Cat. Convenient 1. 0 gram syringe, making this thermal paste very easy to apply. Validated for selective robotic coating equipment including PVA and Nordson ASYMTEK.

#ad



USB 3.0 Power Meter Tester USB load Digital Multimeter Current Tester Voltage Detector DC 30.00V 4.000A Test Speed of Charger Cables QC 2.0/3.0 AP 2.4A AT34+LoadFREE delivery

#ad
AVHzY #ad - Lead free RoHS Compliant. Thin up to one half part thinner to one part coating. Thixotropic, synthetic latex designed to withstand fluxing, wave soldering and cleaning. Easy rework and repairs: solder through the coating or remove with MG Cat. Validated for selective robotic coating equipment including PVA and Nordson ASYMTEK.

Thinner cleaner; Comes with Easy Brush Cap applicator. Dries quickly to a hard, durable, flexible and non-conductive film. Externally qualified to ipc-CC-830B-class A, by Pacific Testing Laboratories. Testers are widely used in the quality inspection of 3c digital peripheral products, current, and are the first choice for digital gamers and electronic enthusiasts.

USB 3.0 Power Meter Tester USB load Digital Multimeter Current Tester Voltage Detector DC 30.00V 4.000A Test Speed of Charger Cables QC 2.0/3.0 AP 2.4A AT34+LoadFREE delivery #ad - Real-time detection of the state of charge of the appliance, voltage, power and other indicators at a glance; Measuring voltage: 3. 7v-3000v; measuring current: 0-4. 000a. The at34 uses a 096-inch ips high-definition color lcd display to display the state of charge of the appliance, voltage, andriod dcp, current, high brightness and long working life.

Certified ul 94 v-0 file# E203094. Thermal conductivity 73 W/mk.

#ad